- 271
- 769 256
RCautoworks
Приєднався 4 вер 2013
What's going on UA-camrs!
We'd love to hear from you, please don't hesitate to get in touch with us if you have any questions concerning a project you are working on and might need help with, or to schedule and appointment to get your car in for work. We're here to help out and don't mind answering questions. Let us know what you'd love to see on our channel, as we will have a variety of informational videos, dyno tunning, installs, and much more.
Call Us
-708 599 5884
Email Us
-RCautoworks@gmail.com
-RCautoworks.sales@gmail.com
website
www.RCautoworks.com
Mailing Address
RCautoworks
7434 w 90 st
Bridgeview, Il
60455
We'd love to hear from you, please don't hesitate to get in touch with us if you have any questions concerning a project you are working on and might need help with, or to schedule and appointment to get your car in for work. We're here to help out and don't mind answering questions. Let us know what you'd love to see on our channel, as we will have a variety of informational videos, dyno tunning, installs, and much more.
Call Us
-708 599 5884
Email Us
-RCautoworks@gmail.com
-RCautoworks.sales@gmail.com
website
www.RCautoworks.com
Mailing Address
RCautoworks
7434 w 90 st
Bridgeview, Il
60455
Відео
Dyno Ready: Fueling Issues, IACV Testing & Much Much More!
Переглядів 26914 днів тому
Dyno Ready: Fueling Issues, IACV Testing & Much Much More!
MythBusters Ep.7: Driving On A Basemap Tune, Dyno Tunes Cause Damage, Low Horsepower = Cheaper Parts
Переглядів 3652 місяці тому
Episode 7 of Automotive MythBusters is here, and we're debunking some of the most persistent myths in the tuning community! In this installment, we're tackling the misconceptions around basemap tunes, the fear of dyno tuning causing damage, and the belief that lower horsepower means cheaper parts. Get ready for a deep dive into the facts that will change how you approach tuning and building you...
BMW & Haltech Elite 550
Переглядів 1883 місяці тому
Looking for a tune, basemap or any type of help with your Haltech or any standalone, shoot us an email. RCautoworks@gmail.com
1975 Porsche 911 on Haltech 2500
Переглядів 1283 місяці тому
We can tune anything on Haltech, contact us.
Tuner Galleria 2024: Saturday | RCautoworks Vlog Day 2
Переглядів 3973 місяці тому
After an unexpected twist on Day 1, we're back stronger with the Acura NSX and the whole crew, ready to dive into the heart of Tuner Galleria. In this episode, we get up close and personal with some of the most impressive builds at the show, featuring a wide array of cars that define the tuner scene. 🎤 Exclusive Interviews: Mike (@MIKES_EJ2) shares the story behind his K24 swapped EJ2 Civic, de...
Road to Tuner Galleria 2024: K24 Turbo NSX, FL5 Civic Type R, JDM CRX | RCautoworks Vlog Day 1
Переглядів 9313 місяці тому
Join the RCautoworks team on our unforgettable journey to Tuner Galleria 2024 in Chicago in this exciting vlog-style video! 🔥 Day 1 kicks off with a bang as Robert and the team navigate an unexpected challenge. The star of the show, our client's Acura NSX (@THE_KSWAPPED_NSX), faces a hiccup on the road. But, as always, the RCautoworks crew is ready for anything. Special thanks to Fernando, Dre,...
Honda Ep3 E85 on Kpro 518hp 422ft lb on 12psi Stopping at 6500 cause we're running out of fuel
Переглядів 1993 місяці тому
518hp 422ft lb on 12 pounds of boost E85 Tuned with Hondata Kpro Stopping short at 6500 cause we're running out of fuel. Plenty left in her. Looking to schedule an appointment? Shoot us a message, or feel free to call. ☎️ 708 599 5884
Miguel's Turbo K-Swapped NSX - Shop Life After Hours Podcast
Переглядів 1,1 тис.3 місяці тому
Hey gearheads, buckle up for a new episode of Shop Life After Hours, where we're hanging out with Miguel (@ the_kswapped_nsx) and his beast of a machine-the Acura NSX. Miguel's got a wild story about how he snagged this beauty, turned it into a turbo K-swapped monster, and why he loves everything about it. In this chat, we talk about how RCautoworks was able to K-swap and boost this NSX, while ...
Honda S2000 k24 With Air Powered Paddle Shift Sequential Transmission Tuned on Haltech
Переглядів 5304 місяці тому
Honda S2000 k24 With Air Powered Paddle Shift Sequential Transmission Tuned on Haltech
Dyno Time Ep.1: MazdaSpeed Protege on Megasquirt
Переглядів 5734 місяці тому
Looking for more info on catch cans. Check out ua-cam.com/video/ZUdABXIxRr4/v-deo.htmlsi=BQRiCVqHVseDRgiP MythBusters catch cans ua-cam.com/video/JsVmWEoqKi4/v-deo.htmlsi=tINnZpHcrO1siomS
Talkin' Shop with K-Series Dre - Shop Life After Hours Podcast
Переглядів 3234 місяці тому
In the latest episode of the Shop Life After Hours podcast, we're thrilled to welcome a special guest, @ kseries_dre (on Instagram), for an exhilarating ride through his automotive journey. Join us as we dive into Dre's collection of cars, past and present. From his eye-catching new FL5 Civic Type R to the EP3 Civic Si and his beloved turbocharged Acura RSX Type S, Dre shares the stories behind...
MythBusters Ep.6: Downpipe/Header + Tune?, Street Tunes VS. Dyno tunes?, 10k for High HP Builds?
Переглядів 6064 місяці тому
Dyno Tuning Podcast: ua-cam.com/video/4LXktGsmcFk/v-deo.htmlsi=NnHQWyiq5xBYQYuN E-Tuning Video: ua-cam.com/video/967imWf0nrs/v-deo.htmlsi=LtAPydFITevSjwKf Welcome back to Episode 6 of our Automotive Myth Busters series, where we dive deep into the misconceptions surrounding car tuning and modifications. In this episode, we tackle the popular belief that a 9th gen Civic Si requires a tune after ...
Dyno Tuning: Everything You Should Know - Shop Life After Hours Podcast
Переглядів 3614 місяці тому
This high-octane episode takes a deep dive into the complexities and nuances of dyno tuning. Join the RCautoworks team as they unravel the mysteries of various dyno types, from rollers to hubs, and discuss how each can play a pivotal role in diagnosing and enhancing your vehicle's performance. Listeners will be treated to a detailed pre-dyno checklist, ensuring your ride is primed and ready for...
Shaved Engine Bays, Head & Block Builds, EVO boost leak test
Переглядів 3564 місяці тому
Shaved Engine Bays, Head & Block Builds, EVO boost leak test
Re-Introduction to the Shop Life After Hours Podcast
Переглядів 2724 місяці тому
Re-Introduction to the Shop Life After Hours Podcast
MythBusters Ep.5: Block Guards, Stock Engine + Boost, Daily Driving a Twin Disc
Переглядів 7244 місяці тому
MythBusters Ep.5: Block Guards, Stock Engine Boost, Daily Driving a Twin Disc
9th Gen Civic Si SuperCharged Problems
Переглядів 1,5 тис.4 місяці тому
9th Gen Civic Si SuperCharged Problems
MythBusters Ep.4: Running No Thermostat Bad? Fuel Injectors all the same? Built Engine =Better MPG?
Переглядів 4495 місяців тому
MythBusters Ep.4: Running No Thermostat Bad? Fuel Injectors all the same? Built Engine =Better MPG?
MythBusters Ep.3: Vtec, Blow-Off Valves, Daily Driving a Built Engine
Переглядів 7305 місяців тому
MythBusters Ep.3: Vtec, Blow-Off Valves, Daily Driving a Built Engine
Why routine maintenance is important
Переглядів 1,2 тис.5 місяців тому
Why routine maintenance is important
MythBusters Ep.2: Boost PSI and Power, Wastegate Sizes, Idle Air Control Valves
Переглядів 8175 місяців тому
MythBusters Ep.2: Boost PSI and Power, Wastegate Sizes, Idle Air Control Valves
MythBusters Ep.1: Fuel injectors, catch cans and back pressure
Переглядів 2 тис.5 місяців тому
MythBusters Ep.1: Fuel injectors, catch cans and back pressure
E85 Testing + Dyno Tuning Behind The Scenes
Переглядів 2296 місяців тому
E85 Testing Dyno Tuning Behind The Scenes
Acura RSX 1300hp setup low boost pull
Переглядів 2477 місяців тому
Acura RSX 1300hp setup low boost pull
Hey. I bought a pistons / rod kit and my wrist pins won’t fit into my rod small bore. Some people say pins need to be fitted at a shop? Is that common? Thanks
@@BulliKid depends on the pin fitment. It should say in the instructions.
@@RCautoworks unfortunatly this is a Chinese brand and instructions are limited. They mentioned heating up the rod and try getting it in, but these are not press, and these are floating to my understanding.
@@BulliKid wrist pin hole could use a little maching it sounds like.
@@RCautoworks any places you suggest around Chicagoland area?
FOR ANYONE reading THIS comment! DO NOT WASTE your hard earned money on Hondata Kpro!!! They have ZERO customer support!! The unit is DATED and ANTIQUATED!! Like an OVERPRICED DINOSAUR!! I TOTALLY REGRET EVER buying one!! I WILL be selling mine off to go Fueltech!!!
290whp at 6200 rpm, not that good...
Keep the good work up my boy.
Unfortunately most of these young guys never had to match parts 30 years ago on a small block build etc and they hear from someone on facebook or TikTok running that part. Then want to argue, even though they don't understand the basics before they start throwing parts at a car
We used to love those kind when I started a speed shop with my racing buddies 30 years ago. Once we showed them what machining and matching could do, they didn't care about the brand names, they just wanted the performance gains.
@searlearnold2867 yeah, it was alot more about the specs and what fit together, more like proper pieces to a puzzle. Nowadays, kids hear this cool car is running this, or hear on social media that that is the best on the market and then they run out and buy it, and then blame the conpany when their car runs like shit because cam is too big, or runners are too big, for their specific application
✅👌
Thanks for watching
Thanks for the video, very informative
Thanks for watching
Beautiful car! I hope he gets it squared away. Thanks for the vid!
Thank you for watching and commenting.
What id i want to put my car back to stock ecu? I tried to do it because i wanted it to sell it but when i did it my car went into limp mode. What can i do?
Scan the check engine light and see why it came on. Most likely you have something installed like a lightweight flywheel, or if you have an intake on and flashed it back to stock, it could run rough. That's why you need to scan codes and figure it out.
The possibilities are endless that's why you gotta listen to what it's trying to tell you
@@RCautoworks i checked it out and the codes are: random/multiple cylinders misfire detecede And the codes are :P0300 P0301 P0302 P0303 P0304. I think it happened because my car is bone stock, and i have the stock flywheel and clutch. And the engine thinks that the car has a problem bc of that. But with the hondata i put it back to stock (the ecu) and now the car is going into limp mode, with the VsA,tmps,check engine flashing light and the car doesn’t go more than 3k rpms. And i want to sell the hondata. What should i do!?
@@scrappycoco2671 either you need to keep flashpro and have a tune installed disabled the misfire codes. Or you can remove the flywheel and install a stock one. Those are the only two options you really have. Unless you wanted to switch over to something like Haltech
I’m in the Chicagoland area and you appear to be a knowledgeable honest tech on S2Ks. I’m interested in a turbo build on my 2004 s2000. Roughly what is the cost including labor? Looking for around 500 whp.
Hey Lenny thanks for the kind words, shoot us an email as there's a few questions that will change the price a little. RCautoworks@gmail.com
Way to keep your boundaries. Why are people so glib and decisive rhetorical language that turns formerly crystal thinkers, into a Hatfields vs. MacCoys type conflict.
That’s a 351-W.🐍
What's next- hood s sealed an the dealer is the only one to work on it. Stock wheels an exhaust or the cars crushed. Anyother words if you want a fast car, you have to buy stock fast. No vtec turbo k20. 😢
Maybe the parts weren’t matched correctly? What did he do for the rear end gear? The car looks like a ‘73 Stang with the 351 Cleveland.
Possible, yes.
Great video. Amazing ride too. I hope he gets everything situated.
I get check engine light when vtc kicks in
There's q couple different check engine lights related to vtc. You'll have to diagnose why it's popping up.
I appreciate the information. F the folks who don't know how to be appreciative.
Thanks for responding, and thanks for watching
here for the MSP!
Definitely a very underrated car
Where u guys located?
7434 w 90st Bridgeview, Illinois 60455 If you are not close we also offer etunes.
Hopefully I can have someone like this gentleman tune my car one day.
Thank you sir
Where is part 2? Thank you!
Can this be done ok the 05 sedan accord v6? If so links to what supercharger to buy
Anything is possible, shoot us an email RCautoworks@gmail.com
Does it work with a steel bumper?
Best bet would be to ask the manufacturer that question.
Too cool for school! A Spyder drove up beside her and took Ms Muffet's breath away ua-cam.com/video/C1lHoNG2SHg/v-deo.htmlsi=_kz4oTtf_qF0XrmO
Dyno Down on Tune Time
Again, most guys dont have block guards installed correctly to begin with. Installing it outside a machine shop just wont provide the intended benefit. For any degree of proper benefit, a welded block guard, installed prior to final bore/hone is the only way to do it. This is where CSS came from. Same concept, different procedure. And you arent doing that on your own.
I got a p0700 and a p0715 I got a d16y8 with vtec and shit runs like ass
Those are auto trans codes, if it's still an automatic you'll need to diagnose them
Very well explained. Just came across your shop since i'm local to the area. Interesting content. Thanks
Thanks for watching Jeff ❤️
Sir, I would like if it is possible to see the video of the adaptation of the H23 Honda engine to the Corvair, I am very attentive to your work and I wish you success in your role. Thank you for your attention.
What would it take for you to tune my MSP?! Gonna get the MS3 pro! Very very clean car
Shoot me an email with the setup and let's discuss. RCautoworks@gmail.com
Did this problem solved out? Can you explain the issue of the vacuum line from turbine housing to manifold, do you have any experience on that as im having boost creep at high rpm and i suspect that wastegate is maxing out at high rpm.
His wastegate was failing, there's a video on our tik tok that shows how it broke
I would need to know the setup, the tune and dyno sheet to exactly be able to see what's going on. There's so much that can come into play with boost creep.
Confirmed my dyno session today. Can't wait. But what motor oil do you recommend for turbo b series? Has break in oil in it now for the first few heat cycles.
Thank you, it really comes down to the engine builders preference but we like Shell Rotella.
be honest is there drone,
Beautiful Car Dre.. I'm loving all the Hondas. The RSX is a beast. The engine bay is emasculate. About losing your Father is rough. I lost my dad to Covid in 21' and I'm still trying to come to terms of that. We'll never get past that as it's just apart of us and our daily. I really like this style of video of having some car friends hanging out and talking about their cars.
Sorry to hear that, don't hesitate to seek help if you feel like you need it. Seeing a therapist was one of the best things I did for myself.
I really do appreciate your videos , man. Did you ever do a video on , Whats the first 5 upgrades to your K series Engine for Power?? I'm sure everyone has their thoughts but I'd like to hear what you have to say on it. I've got the CAI and Downpipe with Ktuner. I also have 410 injectors I haven't put in yet. I wanted to buy a new Fuel rail . My engine already has a 50VTC installed. Im really wanting to swap in a stick and take out the Auto. Everyone keeps telling me to just throw a Turbo on it and it'll be fine. All I really want is 350 hp and I'd be happy for a daily. It was nice to hear about the Block guard not being a good idea. Oh I'm running a K24z engine which I hardly see anyone doing anything with except the Miata boys.
You are my number one guy I go to because I enjoy your Tuning Video's. Great knowledge to know and learn. Tunning my 2012 Accord on Ktune can be a pain in the butt the way you have to tune Fuel and Air with the Curve map and not actual numbers for the Fuel.
Thank you for the positive words, ktuner is fairly different and can be complicated at times. We have other shops every now and then call with ktuner questions so don't beat yourself up to bad.
❤🎉
Thanks for watching
Dope series my boy love it!
Thank you Siricko
Thank you man. Your dedication hasn't gone unnoticed by the community.
Thank you for the kind words and for watching and being a subscriber ❤️
sr me gustaria si es posble ver ei video de la adactacion del motor h23 honda al corvair, estoy muy atento a su trabajo y le deseo exitos en su funcion gracias por su atencion
Kpro and Kpro 4 is VERY Very close to THIS. I watched a gazillion videos on the Hondata for Kpro And no one I mean no one explains it right you made it very concise very easy to understand thank you very much! Hopefully if you haven’t already done some videos you could do some Kpro 4 videos.
I really appreciate that comment, I do have a kpro video out there as well. I do have some more coming out soon. Thank you for watching and also commenting ❤️
@@RCautoworks Yessir. Thank you also.
Does it work on a 2004 ap2 s2k ?
Sure does, if you purchase it from us we will help you get setup and can include a free basemap. Email me if interested RCautoworks@gmail.com
I have a bone stock civic, and i did a basemap reflash, just that. But i got some problems with misfire detection, i guess it was because i don’t have an aftermarket flywheel and i unchecked the misfire detection and the problem went away. But now i want to put my car back in stock ecu but im having the misfire problem again. When i hit the redline i got this checks lights (emissions, abs/vsa, missfire on all four cylinders, and power steering) and the car can’t pass the 3k rpms. And i want to sell the hondata flashpro bc I’m not planning to do mods in this car, but i don’t want to leave my car with basemap and with the misfire detection unchecked. What can i do?
You have another issue going on that should be properly diagnosed.
This car is just like mine very very similar
1:45 we have the same door chime the sound made my dogs perk up lmfao
Hahahah good doggo 🐶
Trying to set up my kpro and I can’t seem to get the tps to display any ideas on how to pull it up?
Damn that thing is dumb ass clean!!!!!
I want to see a 75 Porsche with a K Series in it.
Can you link the paddles? I need one with airbagS
The wheel he us using has no air bags, if you're looking for more help please email us RCautoworks@gmail.com
Bob...we showed up as spectators and it was rough! You guys punched through it. Respect 💯
It felt great that night when I finally fell asleep hahahah, it definetly was a long two days. Thanks for coming and thanks for watching